Price : $22.99
You Save : $123.00 (84%)
Product Description
The VideoSecu articulating mount support most mid size flat panels up to 55 lbs (25 kg) with VESA 75x75/100x100/200x100/200x200mm. This is one of the popular medium size TV mount, with heavy duty steel construction. The two-link arm design provides up to 170 degrees of swivel, 15 degrees tilt up or down, and 3"-20" extension, make it easier for get perfect viewing angle. It also offers 5 degrees roll adjustment for level the mount in different positions. The on arm cable management ring system design, guides wires and prevent cable pinching. Shipped with standard hardware pack.
Product Details
- Shipping Weight: 11 pounds (View shipping rates and policies)
- ASIN: 0972683275
- Item model number: ML523B
Technical Details
- The arm can extend out up to 20". Swivel +/-170 degrees and tilt +/-15 degrees
- Fits VESA 75x75/100x100/200x100/200x200 compliant; Mount plate is 8.5"x8.5"
- Load capacity up to 55 lbs; Post-installation level adjustment allows the TV to perfectly level
- Fits most TVs 22" - 37" LCD LED TV monitor ( check VESA and weight )
- Cable management design; Standard hardware pack included
VideoSecu Articulating LCD LED TV Wall Mount Full Motion Tilt Swivel Mount Bracket for 22" to 37" Flat Screen with VESA 100 200 Mount Pattern 1XE
Customer Reviews
This flat panel mount is adjustable and very cost effective, an excellent product for the money. This arm comes with all needed mounting hardware for either masonry or wall stud mounting as well as a set of 4 screws for several sizes of panel mounting screws. It also comes with a small wrench for two different sizes of hex heads on the arm and an allen wrench for one of the arm adjustments. It is at least a two man operation to attach the flat screen after the arm is attached to the wall. I mounted mine on a stud in the wall. For stud mounting you use two of the six mounting hex head lag screws that come with it. It doesn't say exactly in the directions but you should use a 1/4" drill bit to pre-drill the holes in the stud. I would not recommend trying to use the included hex wrench to tighten down the wall mounting lag screws, you need more leverage to tighten it than it provides; use a crescent wrench or other longer hex wrench. I used a stud finder to locate the studs accurately. Make sure you do not have obvious pipes or electrical going through the wall at the chosen location. They can throw off some stud finders. If you want to quickly adjust one of the arm adjustment screws it also contains a replacement screw that has a slip bar top lever so that it can be loosened and tightened without a wrench. There is one optional cable management loop that attaches to the bottom of the middle of the arm. It could use one more at the wall, but that is easy to improvise. The flat panel we have is 32" and 25 lbs. and works well for the mounting arm.
I really like this product for this price.
I am using this mount for a 27" LCD in my bedroom. Using a swivel mount with tilt works great for almost any room layout. The black powder-coat paint matches the TV, and looks great. Adjustment and locking is easy with the included hex wrench. I would rate this "5 stars" if the mounting screws were better. Made from relatively soft steel, the screw head strips very easily. After ruining one screw, I replaced it with a large black deck screw. It might be advisable to drill small pilot holes before attempting to drive the screws.
Word of caution: If you do not drive the proper mounting screws into the center of a wall stud, if you exceed the specified TV weight limit, or if you try to get by with a really cheap swing arm mount, you may be signing a death sentence for your $500 TV (and perhaps yourself)!
0 comments:
Post a Comment